 |
|
| The information below may apply to Mercedes E300, 500E, SL, SE, SEL & SEC and many other Mercedes models
|
|
|
|
Auto Repair Manual - How to read codes (No Special Tools Needed) |
|
|
1 Drive vehicle until it reaches operating temperature.
2 Stop the vehicle, place it in park or neutral and turn ignition OFF.
5 The connector will be at the rear of the engine bay on the left or right side. NOTE - Only one code can be accessed at a time, to get the next code close switch for 2 to 4 seconds
6 Press the continue button to enter the code numbers and get the code description(s).
| | |
|
Connector Diagram |
|
|
|
|
 |
Example Models: E300, 500E, SL, SE, SEL & SEC
* This Connector may also be used for other Mercedes models
| | | | |
| |
|
Code Format Description |
|
|
• Each flash codes is represented by straight count. Twenty flashes indicates the code "20".
• Each flash lasts for 0.5 seconds, and there is a 1-second pause between each digit.
• Count the number of flashes in each series, and record the code.
| | |
|
|
Code Format Diagram |
|
 |
| |
| | |
|
|
|
To move to the next screen click on the Continue button |
|
|
|
|
| |
Note on Example Model(s): E300, 500E, SL, SE, SEL & SEC
The example model(s) shown, E300, 500E, SL, SE, SEL & SEC, for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.
|
| |
|
| All content copyright Rennacs Limited, 2008. |
| For comments and feedback please email comments@rennacs.com | |
|
